Product line 04 / 12 · Power Distribution
One 3U panel that feeds the whole rack: nine 220 VAC outlets, conditioned +5 / +12 / −12 / +24 VDC rails, load switch, circuit breaker and emergency stop — engineered as a 19″ module, not an afterthought.
C-BOX builds power distribution as a proper rack module. Our 3U PDU houses everything the electrical side of a system needs in one finned 481 × 482.7 × 132.9 mm chassis: a load switch with OFF-position locking, a double-pole circuit breaker, an emergency stop and nine fuse-protected 220 VAC outlets — plus a conditioned low-voltage section delivering +5 V, +12 V, −12 V and +24 V rails for the electronics in the rack. The low-voltage-controls-high-voltage circuit concept keeps the operator side safe, and every unit is wired, labelled and function-tested in our workshop before it ships. 1U and 2U variants and custom outlet mixes are built to order.
| Height | 3U (1U / 2U variants on request) |
| Dimensions | 481 × 482.7 × 132.9 mm, side cooling fins |
| Input | C19 16 A · 115 / 250 VAC · 50 / 60 Hz |
| AC outputs | 9 × 220 VAC, ≥ 3500 W total |
| DC outputs | +5 V ≥ 32.5 W · ±12 V ≥ 120 W · +24 V ≥ 240 W |
| Front panel | load switch (OFF lock) · double-pole MCB · e-stop · fuse · status LEDs |
| Environment | −20…+60 °C operating · −40…+65 °C storage |
| Weight | approx. 9.05 kg |
Where this product line is typically used.
Parts that usually go together with Power Distribution Units (PDU).
Cross-referencing against Schroff / nVent part numbers is our daily routine — we quote within 24 hours for standard items.
