Product line 02 / 12 · Cabinet Accessories
Small parts that finish a cabinet properly — panels, shelves, drawers, brackets and fasteners, all dimension-compatible with standard 19″ mounting flanges.
A cabinet is only as tidy as its accessories. C-BOX supplies the full set of mounting hardware that turns an empty frame into a working rack: blanking panels for airflow discipline, vented shelf pallets for non-rack gear, sliding keyboard drawers, L brackets for heavy equipment, and the screws, cage nuts and washers that hold it all together. Standard parts ship from stock; custom widths, colours and hole patterns are made to order.
| Blank panels | 1U (44 mm) / 2U (88 mm), steel 1.5 mm |
| Shelf pallets | 1U / 2U, vented, load up to 150 kg |
| Keyboard drawer | 1U sliding, lockable front |
| L bracket | steel, black or galvanised finish |
| Fasteners | M5 / M6 cage nuts, screws, washers, clips |
| Finish | RAL powder coating / zinc plating |
Six accessory families — all made in our own Kunshan / Hefei plants and dimension-compatible with standard 19″ mounting flanges. Click through to request a quote with the item and quantity.
Sliding 1U drawer that turns a 19″ cabinet into a compact workstation — lockable front, keyboard and mouse pad mounts inside.


Lightweight aluminium drawer with cylinder lock — a neat drop-in storage tray for tools, manuals and spare parts.

Solid steel blanking panels in 1U / 2U / 3U / 4U heights — close unused U-space and keep the cabinet airflow path clean.


Four-post support angles that carry heavy, non-rack-mounted units inside a 19″ cabinet. Supplied as a pair.


Robust steel drawers on ball-bearing slides for instruments and cabling — 1U to 3U heights, lockable on request.



Vented shelf pallets for non-rack-mountable equipment — static load up to 150 kg.

Same interface dimensions as the nVent SCHROFF equivalents — our own tooling, material and finish.
Every model has its own page with specifications and RFQ. Use your browser search (Ctrl/Cmd+F) on this page, or send us the number and we will quote it.
A cabinet frame is a shell. What turns it into an enclosure is the accessory set: front and rear doors, side panels, top cover, plinth or castors, and the earthing that ties them together. Each item changes IP rating, load path and serviceability.
| Accessory | What it decides | What to state on the order |
|---|---|---|
| Front door | access frequency, airflow, IP contribution | glazed or perforated steel, hinge side, lock type |
| Rear door | service access and cable entry | single or split door, brushed cable entry, lock |
| Side panels | closure and EMC continuity | removable or fixed, with or without brush strip |
| Top cover | cable entry from above, fan cut-outs | plain, with brush entry, with fan plate |
| Plinth / castors | load path, floor fixing, height lost | 100 mm plinth or 75 mm castors, bolt-down kit |
| Earthing kit | bonding of door and panels to the frame | number of bonding points, cable length |
A frame alone is an open structure: IP20 at best. The IP figure quoted for a cabinet applies to the assembled enclosure with doors, panels, top cover and gland plate fitted, and with the door closed. If the specification says IP55, the accessory list has to include the sealing profile and the cable entry has to be glanded — a brush strip is IP20 territory and will not pass a hose test, however good the door seal is.
Castors are for moving a cabinet into position, not for carrying it in service. Levelling feet or a bolted plinth take the load once the cabinet is in place, which matters on a raised floor and for anything over roughly 400 kg. State the finished load per cabinet and whether the floor is concrete or a raised access floor; the fixing kit follows from that.
Where this product line is typically used.
Parts that usually go together with Rack Cabinet Accessories.
Related categories
Standard parts ship from stock. Custom widths, colours and hole patterns are made to order.
Vented shelf pallets in 1U / 2U carry up to 150 kg static. Heavier units go on the L brackets and support angles. Fasteners are M5 / M6 cage nuts, screws and washers.
Made in our own plants — chassis and precision parts from Kunshan, cabinets and surface finishing from Hefei: CNC punching, press braking, CNC machining, assembly, inspection and export packing in-house.
Kunshan plant →Hefei plant →Cross-referencing against major international 19″ system part numbers is our daily routine — we quote within 24 hours for standard items.
Every part below follows the same interface dimensions as the standard 19″ subrack system, so it fits existing installations without rework. If your drawing or BOM lists an 8-digit order number, send it over — we will confirm the equivalent C-BOX part, lead time and price.
Dimensionally compatible with nVent SCHROFF parts under the same order numbers — including 34560-084, 34561-584 and 24560-235. A direct replacement, same interface dimensions. Browse all 127 model pages →