Product line 09 / 12 · Subrack Accessories
Guide rails, handles, coding keys, EMC clips and the screws that hold a subrack together — catalogue parts, cross-referenced against leading international brands.
These are the parts that decide whether a subrack works in daily use. C-BOX supplies light and heavy-duty EMC guide rails for CompactPCI, PXIe and VPX boards — the same rail sets go into our 3U and 6U VPX chassis — and the full handle family: IEL and IET type inserter / extractor handles per IEEE 1101.10 and IEC 60297-3-102, rated for insertion and extraction forces up to 700 N per pair — zinc die-cast bodies with integrated alignment pins, PC levers and keys in RAL 9005 / RAL 7035, UL 94 V-0 rated, with microswitch and coding-pin options. Add coding keys, ESD rail clips and the complete M2.5 fastener set, and every rail part number is cross-referenced against the international brands you already buy — send us the code on your drawing and we quote the equivalent.
| Guide rail groove | 2 mm, EMC contact versions |
| Rail lengths | 70 / 80 / 100 / 160 / 220 / 280 / 340 / 400 mm |
| Offset | non-offset and 0.1″ (2.54 mm) offset |
| Colours | red / grey / green (coding) |
| VPX rails | 3U / 6U boards, 42HP / 63HP / 84HP |
| Handles | IEL / IET inserter-extractor, 700 N per pair, zinc die-cast + PC |
| Handle options | microswitch · coding pin · label strip · RAL 9005 / 7035 |
| Materials | UL 94 V-0 plastics, nickel-plated steel fasteners |
| Fasteners | M2.5 × 9.3 self-forming Torx, M3 screw sets |
Same interface dimensions as the nVent SCHROFF equivalents — our own tooling, material and finish.
Every model has its own page with specifications and RFQ. Use your browser search (Ctrl/Cmd+F) on this page, or send us the number and we will quote it.
A subrack order is rarely one part number. It is a kit: rails, a rear panel or backplane, panels, handles, fasteners and the small parts that nobody remembers until assembly day.
When we quote a subrack build, the accessory list is generated from the slot count and board depth, not from a catalogue page. The checklist below is the one we use; it is also the fastest way for a buyer to sanity-check someone else’s bill of materials.
| Item | Quantity rule | Watch out for |
|---|---|---|
| PCB guide rails | two per board position, plus one pair for each gap you want to keep open | rail code has to match the board depth: 160 / 220 / 280 mm body |
| Rail coding / keying | one set per position when two board types share a subrack | coding strips must be fitted before the rails go in |
| Horizontal rails / rear rails | per 3 U tier, plus rear rails if rear I/O is used | rear rail depth differs from the front rail on deep builds |
| Front panels or blanking panels | one per unused HP | blanking panels also close the airflow path |
| Handles | per plug-in unit, style matched to insertion force | IEL and IET handles are not interchangeable on the same panel cut-out |
| EMC gasket / contact strip | per unit if the shielding spec is stated | textile and spring-contact gaskets need different panel preparation |
| Fasteners | count from panel and rail fixing points, plus 10% spare | thread size and head style are usually fixed by the customer drawing |
| Earthing / bonding | one point per removable panel | painted surfaces need a masked contact area |
Standard rails and panels are the fast part of a build. Coding strips, special handle colours, non-standard screw finishes and customer-specific gasket profiles are the items that turn a two-week build into a six-week one. If the schedule matters, freeze the hardware list first and let the sheet-metal parts follow.
Both work. A kit is quicker to specify and arrives complete; individual part numbers suit customers who already hold stock of rails and only need panels. Tell us which model you want and we quote the matching way — including the case where you send us a competitor part number and ask what the equivalent hardware set looks like.
Where this product line is typically used.
Light and heavy-duty EMC guide rails, 2 mm groove width, lengths 70–400 mm, non-offset and 0.1″ offset versions, in red / grey / green. Coding keys and ESD clips available.
| Card length (mm) | Colour | Non-offset rail | 0.1″ offset rail |
|---|---|---|---|
| 80 | Red | 24560-355 · 64560-085 | — |
| 80 | Grey | 24560-360 · 64560-086 | — |
| 160 | Red | 24560-356 · 64560-089 | — |
| 160 | Grey | 24560-358 · 64560-090 | — |
| 160 | Green | — | 24560-359 · 64560-071 |
| 220 | Red | 64560-091 | — |
| 220 | Grey | 64560-092 | — |
| 220 | Green | — | 64560-072 |
| 280 / 340 / 400 | Red | on request | |
Groove width 2 mm · whole rails · coding keys & ESD clips on request. Other lengths available to order. Part numbers cross-referenced against leading international brands. MOQ is printed on each part page — how MOQ and lead time are built up.
Parts that usually go together with Subrack Accessories.
Related categories
Light rails suit low-mass boards and low insertion cycles. Heavy-duty EMC rails suit frequent insertion, heavier boards and full shielding contact. Both are 2 mm groove width, 70-400 mm long, non-offset or 0.1 inch offset, for CompactPCI, PXIe and VPX.
Both are inserter / extractor handles to IEEE 1101.10 and IEC 60297-3-102, rated to 700 N per pair. The choice follows the board position in the slot and the panel cut-out. Bodies are zinc die-cast with integrated alignment pins, PC levers and keys in RAL 9005 / 7035, UL 94 V-0, with microswitch and coding-pin options.
Yes. Every rail and handle part number is cross-referenced against the brands you already buy - send the code from your drawing and we quote the equivalent. Coding keys, ESD rail clips and the M2.5 fastener set (steel, brass, stainless, nylon) complete the set.
Rails are chosen by insertion depth, and board depth is 15 mm less than that insertion depth. The common board depths are 160, 220 and 280 mm, which is why kits come in 175, 235 and 295 mm. If a rear connector or transition module sits behind the board, add that space to the frame depth rather than to the rail — a longer rail does not give a board more depth.
The rails do not make the shield. Shielding comes from the contact chain: front-panel gasket, side-panel contact strip, and the rear connection at the backplane or rear hood. Plastic rails need a separate ESD clip or contact spring. Plain rails are enough when you only need mechanical guidance, but if a shielding figure is in the specification the contact points have to be designed in — see our notes on EMC shielding contact points.
Made in our own plants — chassis and precision parts from Kunshan, cabinets and surface finishing from Hefei: CNC punching, press braking, CNC machining, assembly, inspection and export packing in-house.
Kunshan plant →Hefei plant →Cross-referencing against major international 19″ system part numbers is our daily routine — we quote within 24 hours for standard items.