Subrack Accessories · Handles
EMC Shielded subrack for backplane mounting, heavy version with tox welded side panels.
Catalog#: 24563-900 · 24563900

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | U height | Depth | Pack qty | Description |
|---|---|---|---|---|
| 24563-782 | — | 355 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 355 mm, D1 220 mm |
| 24563-783 | — | 415 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 415 mm, D1 220 mm |
| 24563-784 | — | 475 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 475 mm, D1 220 mm |
| 24563-790 | — | 295 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 295 mm, D1 280 mm |
| 24563-791 | — | 355 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 355 mm, D1 280 mm |
| 24563-792 | — | 415 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 415 mm, D1 280 mm |
| 24563-793 | — | 475 mm | 2 | EuropacPRO Advanced EMC Plus, Dual Mesh Top and Bottom Covers, Screwed to Side Panel, 84 HP, 475 mm, D1 280 mm |
| 24563-900 ← this page | 3U | 235 mm | 1 | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 235 mm, D1 160 mm |
| 24563-901 | 3U | 295 mm | 1 | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 295 mm, D1 160 mm |
| 24563-903 | 3U | 355 mm | 1 | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 355 mm, D1 160 mm |
| 24563-910 | 6U | 235 mm | 1 | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 6 U, 235 mm, D1 160 mm |
| 24563-911 | 6U | 295 mm | 1 | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 6 U, 295 mm, D1 160 mm |
| 24563-913 | 6U | 355 mm | 1 | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 6 U, 355 mm, D1 160 mm |
| 24563-920 | 3U | 235 mm | 1 | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 235 mm, D1 160 mm |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 10 pcs · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 235 mm deep. Rails run on a 15 mm grid, so 235 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
Yes. Shielding is part of the kit, with a contact gasket at the side panels and contact surfaces at the rails — Textile EMC gasket. Front panels and blanking panels carry their own gasket, so specify shielded panels for the slots you populate.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24563-900 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-900: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-900, nVent 24563-900, SCHROFF 24563-900 — matching C-BOX catalog number 24563-900. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-900 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote