Subrack Accessories · Handles
EMC Shielded subrack for backplane mounting, heavy version with tox welded side panels.
Catalog#: 24563-963 · 24563963

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | U height | Depth | Description |
|---|---|---|---|
| 24563-934 | 6U | 355 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 6 U, 355 mm, D1 220 mm |
| 24563-935 | 6U | 355 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 6 U, 355 mm, D1 280 mm |
| 24563-950 | 3U | 235 mm | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 235 mm, D1 160… |
| 24563-951 | 3U | 295 mm | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 295 mm, D1 160… |
| 24563-953 | 3U | 355 mm | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 355 mm, D1 160… |
| 24563-960 | 6U | 235 mm | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 6 U, 235 mm, D1 160… |
| 24563-961 | 6U | 295 mm | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 6 U, 295 mm, D1 160… |
| 24563-963 ← this page | 6U | 355 mm | EuropacPRO Advanced EMC 45, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 6 U, 355 mm, D1 160… |
| 24563-970 | 3U | 235 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 235 mm, D1 1… |
| 24563-971 | 3U | 295 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 295 mm, D1 1… |
| 24563-972 | 3U | 295 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 295 mm, D1 2… |
| 24563-973 | 3U | 355 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 355 mm, D1 1… |
| 24563-974 | 3U | 355 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 355 mm, D1 2… |
| 24563-975 | 3U | 355 mm | EuropacPRO Advanced EMC Plus, 19" Subrack Kit for Backplane, Heavy, Shielded, without Front Handle, 3 U, 355 mm, D1 2… |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 10 pcs · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 355 mm deep. Rails run on a 15 mm grid, so 355 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
Yes. Shielding is part of the kit, with a contact gasket at the side panels and contact surfaces at the rails — Textile EMC gasket. Front panels and blanking panels carry their own gasket, so specify shielded panels for the slots you populate.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24563-963 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-963: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-963, nVent 24563-963, SCHROFF 24563-963 — matching C-BOX catalog number 24563-963. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-963 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote