Subrack Accessories · Handles
Non-EMC shielded subrack for backplane mounting, heavy version with tox welded side panels and front handle.
Catalog#: 24567-161 · 24567161

Codes that start with 24567 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | U height | Depth | Pack qty | Description |
|---|---|---|---|---|
| 24567-125 | 3U | 175 mm | 2 | EuropacPRO Side Panel for Stainless Steel Gasket, Type H, Handle Holes, 3 U, 175 mm |
| 24567-127 | 3U | 235 mm | 2 | EuropacPRO Side Panel for Stainless Steel Gasket, Type H, Handle Holes, 3 U, 235 mm |
| 24567-129 | 3U | 295 mm | 2 | EuropacPRO Side Panel for Stainless Steel Gasket, Type H, Handle Holes, 3 U, 295 mm |
| 24567-131 | 3U | 355 mm | 2 | EuropacPRO Side Panel for Stainless Steel Gasket, Type H, Handle Holes, 3 U, 355 mm |
| 24567-149 | 3U | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Rugged, Shielded, 3 U, 295 mm |
| 24567-161 ← this page | 3U | 175 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, With Front Handle, 3 U, 175 mm |
| 24567-162 | 3U | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, With Front Handle, 3 U, 235 mm |
| 24567-163 | 3U | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, With Front Handle, 3 U, 295 mm |
| 24567-164 | 3U | 355 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, With Front Handle, 3 U, 355 mm |
| 24567-172 | 3U | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 235 mm |
| 24567-173 | 3U | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 295 mm |
| 24567-174 | 3U | 355 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, Front Handle, 3 U, 355 mm |
| 24567-425 | 6U | 175 mm | 2 | EuropacPRO Side Panel for Stainless Steel Gasket, Type H, Handle Holes, 6 U, 175 mm |
| 24567-427 | 6U | 235 mm | 2 | EuropacPRO Side Panel for Stainless Steel Gasket, Type H, Handle Holes, 6 U, 235 mm |
Showing 14 of 24 codes in the 24567 series — see the full series →
Lead time 7 days for standard items · MOQ 10 pcs · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 175 mm deep. Rails run on a 15 mm grid, so 175 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24567-161 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24567-161: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24567-161, nVent 24567-161, SCHROFF 24567-161 — matching C-BOX catalog number 24567-161. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24567-161 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote