Subracks & 19″ Chassis · 19" Subracks & Cases
Non-shielded subrack for Din Connector mounting EN 60603-2 (DIN 41612).
Catalog#: 24563-491 · 24563491

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | Width | Depth | Pack qty | Description |
|---|---|---|---|---|
| 24563-461 | — | 175 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 6 U, 175 mm |
| 24563-462 | — | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 6 U, 235 mm |
| 24563-463 | — | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 6 U, 295 mm |
| 24563-464 | — | 355 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 6 U, 355 mm |
| 24563-472 | — | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 6 U, 235 mm |
| 24563-473 | — | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 6 U, 295 mm |
| 24563-474 | — | 355 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 6 U, 355 mm |
| 24563-491 ← this page | — | 175 mm | 1 | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 6 U, 175 mm |
| 24563-492 | — | 235 mm | 1 | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 6 U, 235 mm |
| 24563-493 | — | 295 mm | 1 | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 6 U, 295 mm |
| 24563-494 | — | 355 mm | 1 | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 6 U, 355 mm |
| 24563-555 | 36HP | 2.3 mm | 2 | EuropacPRO Advanced EMC 45 Top and Bottom Covers, Screwed to Side Panel, Ø 2.3mm, 36 HP, 175 mm |
| 24563-556 | 36HP | 2.3 mm | 2 | EuropacPRO Advanced EMC 45 Top and Bottom Covers, Screwed to Side Panel, Ø 2.3mm, 36 HP, 235 mm |
| 24563-560 | 42HP | 2.3 mm | 2 | EuropacPRO Advanced EMC 45 Top and Bottom Covers, Screwed to Side Panel, Ø 2.3mm, 42 HP, 175 mm |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 175 mm deep. Rails run on a 15 mm grid, so 175 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
DIN connector mount: the boards plug into IEC 60603-2 / DIN 41612 connectors carried in the rails, so the connector is part of the mechanics. If a rear PCB is planned instead, this is the wrong variant — the backplane-mount version of the same series has the rail profile for an insulating strip.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24563-491 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-491: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-491, nVent 24563-491, SCHROFF 24563-491 — matching C-BOX catalog number 24563-491. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-491 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote