Subracks & 19″ Chassis · 19" Subracks & Cases
Subrack for assembly to a wall or cabinet panel for Din connector mounting without rear hood.
Catalog#: 24563-110 · 24563110

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | Width | Depth | Pack qty | Description |
|---|---|---|---|---|
| 24563-033 | 8HP | 160 mm | — | AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 8HP, 160mm |
| 24563-040 | 4HP | 160 mm | 10 | AirBender, Card Guide Insert, 70P Blockage, 4HP, 160mm, 10 Pieces Kit |
| 24563-096 | 84HP | 2.5 mm | 1 | EuropacPRO Front Panel for 19" Module Support, 3 U, 84 HP, 2.5 mm, Al, Front Anodized, Rear Conductive |
| 24563-100 | 84HP | 115 mm | 1 | EuropacPRO 19" Subrack Kit for Power Distribution Module, Unshielded, 3 U, 84 HP, 115 mm |
| 24563-107 | — | 205 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm |
| 24563-108 | — | 205 mm | — | EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm |
| 24563-109 | — | 205 mm | 1 | EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm |
| 24563-110 ← this page | — | 205 mm | — | EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm |
| 24563-131 | — | 175 mm | — | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 175 mm |
| 24563-132 | — | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 235 mm |
| 24563-133 | — | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 295 mm |
| 24563-134 | — | 355 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 355 mm |
| 24563-135 | — | 415 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 415 mm |
| 24563-136 | — | 475 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 475 mm |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 205 mm deep. Rails run on a 15 mm grid, so 205 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
DIN connector mount: the boards plug into IEC 60603-2 / DIN 41612 connectors carried in the rails, so the connector is part of the mechanics. If a rear PCB is planned instead, this is the wrong variant — the backplane-mount version of the same series has the rail profile for an insulating strip.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24563-110 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-110: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-110, nVent 24563-110, SCHROFF 24563-110 — matching C-BOX catalog number 24563-110. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-110 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote