Kunshan Plant · Jiangsu  |  Hefei Plant · Anhui, China [email protected]  |  WhatsApp +86 132 6227 6239
C-BOX Electronic Technology Request a Quote
Home  ›  Products  ›  Subracks & 19″ Chassis  ›  24563-107

Subracks & 19″ Chassis · 19" Subracks & Cases

EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm

Subrack for assembly to a wall or cabinet panel for backplane mounting without rear hood.

Catalog#: 24563-107 · 24563107

Download Catalog (PDF) Download Spec Sheet (PDF) Dimension & Hole Layout (PDF) Request a Sample
Lead time
7 days
standard items, ex-works China
MOQ
1 pc
one unit is fine — mix sizes freely
Samples
On request
we ship a sample against your PO or courier account
C-BOX EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm, catalog number 24563-107

Features

  • Aluminum construction
  • Anodized; Passivated finish
  • 28HP rack width
  • 3U rack height
  • Subrack/Chassis
  • Complies with IEC 60297-3-103

Specifications

Catalog Number24563-107
Rack Width28HP
Rack Height3U
MaterialAluminum
FinishAnodized; Passivated
Product TypeSubrack/Chassis
Complies WithIEC 60297-3-103
Static Load2.5kg
Package Quantity1
Gross Weight0.782kg
Depth205mm
For MountingBackplane
Board Depth160mm
Handle IncludedNo
MountingWall
EMC ShieldingNo

Item(s) Delivered

Same series · catalog number comparison

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.

Catalog no.WidthDepthPack qtyDescription
24563-0304HP160 mm—AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Textile, 3U, 4HP, 160mm
24563-0318HP160 mm—AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Textile, 3U, 8HP, 160mm
24563-0324HP160 mm—AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 4HP, 160mm
24563-0338HP160 mm—AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 8HP, 160mm
24563-0404HP160 mm10AirBender, Card Guide Insert, 70P Blockage, 4HP, 160mm, 10 Pieces Kit
24563-09684HP2.5 mm1EuropacPRO Front Panel for 19" Module Support, 3 U, 84 HP, 2.5 mm, Al, Front Anodized, Rear Conductive
24563-10084HP115 mm1EuropacPRO 19" Subrack Kit for Power Distribution Module, Unshielded, 3 U, 84 HP, 115 mm
24563-107 ← this page—205 mm1EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm
24563-108—205 mm—EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
24563-109—205 mm1EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm
24563-110—205 mm—EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
24563-131—175 mm—EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 175 mm
24563-132—235 mm1EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 235 mm
24563-133—295 mm1EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 295 mm

Showing 14 of 167 codes in the 24563 series — see the full series →

Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample

Questions specific to 24563-107

Answers below use this catalog number's own figures from the specification table above.

205 mm deep — which board depth does that take?

This frame is 205 mm deep. Rails run on a 15 mm grid, so 205 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.

Does it take a backplane or DIN connectors?

Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.

Is EMC shielding available for this variant?

No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.

2.5 kg static load — what does that cover?

The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.

Related 19" Subracks & Cases

Catalog#: 21500-067
EuropacPRO 19" Subrack Kit for Railway, Retrofit Shielding, SNCF, 3 U, 36 HP, 320 mm
Catalog#: 21500-068
EuropacPRO 19" Subrack Kit for Railway, Shielded, SNCF, 3 U, 36 HP, 320 mm
Catalog#: 21500-070
EuropacPRO 19" Subrack Kit for Railway, Retrofit Shielding, SNCF, 6 U, 36 HP, 320 mm
Catalog#: 21500-071
EuropacPRO 19" Subrack Kit for Railway, Shielded, SNCF, 6 U, 36 HP, 320 mm
Catalog#: 24563-108
EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
Catalog#: 24563-109
EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm
Catalog#: 24563-110
EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
Catalog#: 24563-144
EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 355 mm

Compatibility with nVent SCHROFF 24563-107

This C-BOX part is compatible with nVent SCHROFF 24563-107 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-107: a drop-in alternative for existing installations, no rework required.

Cross-reference: nVent SCHROFF 24563-107, nVent 24563-107, SCHROFF 24563-107 — matching C-BOX catalog number 24563-107. Same hole pattern, same panel cut-out, same thread.

Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.

Send us your drawing or part number

Need 24563-107 or a compatible custom version? Send an RFQ — engineering response within one business day.

Request a Quote