Kunshan Plant · Jiangsu  |  Hefei Plant · Anhui, China [email protected]  |  WhatsApp +86 132 6227 6239
C-BOX Electronic Technology Request a Quote
Home  ›  Products  ›  Subracks & 19″ Chassis  ›  24563-109

Subracks & 19″ Chassis · 19" Subracks & Cases

EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm

Subrack for assembly to a wall or cabinet panel for Din connector mounting without rear hood.

Catalog#: 24563-109 · 24563109

Download Catalog (PDF) Download Spec Sheet (PDF) Dimension & Hole Layout (PDF) Request a Sample
Lead time
7 days
standard items, ex-works China
MOQ
1 pc
one unit is fine — mix sizes freely
Samples
On request
we ship a sample against your PO or courier account
C-BOX EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm, catalog number 24563-109

Features

  • Aluminum construction
  • Anodized; Passivated finish
  • 28HP rack width
  • 3U rack height
  • Subrack/Chassis
  • Complies with IEC 60297-3-103

Specifications

Catalog Number24563-109
Rack Width28HP
Rack Height3U
MaterialAluminum
FinishAnodized; Passivated
Product TypeSubrack/Chassis
Complies WithIEC 60297-3-103
Static Load2.5kg
Package Quantity1
Gross Weight0.79kg
Depth205mm
For MountingDIN Connector
Board Depth160mm
EMC ShieldingNo
Handle IncludedNo
MountingWall

Item(s) Delivered

Same series · catalog number comparison

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.

Catalog no.WidthDepthPack qtyDescription
24563-0324HP160 mm—AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 4HP, 160mm
24563-0338HP160 mm—AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 8HP, 160mm
24563-0404HP160 mm10AirBender, Card Guide Insert, 70P Blockage, 4HP, 160mm, 10 Pieces Kit
24563-09684HP2.5 mm1EuropacPRO Front Panel for 19" Module Support, 3 U, 84 HP, 2.5 mm, Al, Front Anodized, Rear Conductive
24563-10084HP115 mm1EuropacPRO 19" Subrack Kit for Power Distribution Module, Unshielded, 3 U, 84 HP, 115 mm
24563-107—205 mm1EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm
24563-108—205 mm—EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
24563-109 ← this page—205 mm1EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm
24563-110—205 mm—EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
24563-131—175 mm—EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 175 mm
24563-132—235 mm1EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 235 mm
24563-133—295 mm1EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 295 mm
24563-134—355 mm1EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 355 mm
24563-135—415 mm1EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 415 mm

Showing 14 of 167 codes in the 24563 series — see the full series →

Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample

Questions specific to 24563-109

Answers below use this catalog number's own figures from the specification table above.

205 mm deep — which board depth does that take?

This frame is 205 mm deep. Rails run on a 15 mm grid, so 205 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.

Does it take DIN connectors or a backplane?

DIN connector mount: the boards plug into IEC 60603-2 / DIN 41612 connectors carried in the rails, so the connector is part of the mechanics. If a rear PCB is planned instead, this is the wrong variant — the backplane-mount version of the same series has the rail profile for an insulating strip.

Is EMC shielding available for this variant?

No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.

2.5 kg static load — what does that cover?

The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.

Related 19" Subracks & Cases

Catalog#: 21500-067
EuropacPRO 19" Subrack Kit for Railway, Retrofit Shielding, SNCF, 3 U, 36 HP, 320 mm
Catalog#: 21500-068
EuropacPRO 19" Subrack Kit for Railway, Shielded, SNCF, 3 U, 36 HP, 320 mm
Catalog#: 21500-070
EuropacPRO 19" Subrack Kit for Railway, Retrofit Shielding, SNCF, 6 U, 36 HP, 320 mm
Catalog#: 21500-071
EuropacPRO 19" Subrack Kit for Railway, Shielded, SNCF, 6 U, 36 HP, 320 mm
Catalog#: 24563-107
EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm
Catalog#: 24563-108
EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
Catalog#: 24563-110
EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
Catalog#: 24563-144
EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 355 mm

Compatibility with nVent SCHROFF 24563-109

This C-BOX part is compatible with nVent SCHROFF 24563-109 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-109: a drop-in alternative for existing installations, no rework required.

Cross-reference: nVent SCHROFF 24563-109, nVent 24563-109, SCHROFF 24563-109 — matching C-BOX catalog number 24563-109. Same hole pattern, same panel cut-out, same thread.

Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.

Send us your drawing or part number

Need 24563-109 or a compatible custom version? Send an RFQ — engineering response within one business day.

Request a Quote