Power Distribution Units (PDU) · PDU
For mounting installation devices in accordance with DIN 43880 in sizes 1-3 with snap-in technology e.g. mounting sockets, circuit breakers or residual current...
Catalog#: 24563-100 · 24563100

This C-BOX part is compatible with nVent SCHROFF 24563-100 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-100: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-100, nVent 24563-100, SCHROFF 24563-100 — matching C-BOX catalog number 24563-100. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-100 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a QuoteCodes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | Width | Depth | Pack qty | Description |
|---|---|---|---|---|
| 24563-030 | 4HP | 160 mm | — | AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Textile, 3U, 4HP, 160mm |
| 24563-031 | 8HP | 160 mm | — | AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Textile, 3U, 8HP, 160mm |
| 24563-032 | 4HP | 160 mm | — | AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 4HP, 160mm |
| 24563-033 | 8HP | 160 mm | — | AirInlet Plug-In Unit, with Dustfilter, EMC Gasket Stainless Steel, 3U, 8HP, 160mm |
| 24563-040 | 4HP | 160 mm | 10 | AirBender, Card Guide Insert, 70P Blockage, 4HP, 160mm, 10 Pieces Kit |
| 24563-096 | 84HP | 2.5 mm | 1 | EuropacPRO Front Panel for 19" Module Support, 3 U, 84 HP, 2.5 mm, Al, Front Anodized, Rear Conductive |
| 24563-100 ← this page | 84HP | 115 mm | 1 | EuropacPRO 19" Subrack Kit for Power Distribution Module, Unshielded, 3 U, 84 HP, 115 mm |
| 24563-107 | — | 205 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm |
| 24563-108 | — | 205 mm | — | EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm |
| 24563-109 | — | 205 mm | 1 | EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm |
| 24563-110 | — | 205 mm | — | EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm |
| 24563-131 | — | 175 mm | — | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 175 mm |
| 24563-132 | — | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 235 mm |
| 24563-133 | — | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Retrofit Shielding, 3 U, 295 mm |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 115 mm deep. Rails run on a 15 mm grid, so the board it takes is 15 mm shorter than the insertion depth. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
No, handles are ordered separately. IEL / IET inserter-extractor handles take 700 N per pair for CompactPCI and VME64x; the XL handle takes 1500 N for VPX. The fixing hardware differs below 8 HP and from 8 HP up, so state the panel width with the handle order.