Subracks & 19″ Chassis · 19" Subracks & Cases
Rear horizontal rail for backplane mounting with insulation strip
Catalog#: 24563-161 · 24563161

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | Depth | Description |
|---|---|---|
| 24563-142 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 235 mm |
| 24563-143 | 295 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 295 mm |
| 24563-144 | 355 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 355 mm |
| 24563-145 | 415 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 415 mm |
| 24563-146 | 475 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 475 mm |
| 24563-152 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, CompactPCI, 3 U, 235 mm |
| 24563-157 | 275 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, CompactPCI, 3 U, 275 mm |
| 24563-161 ← this page | 175 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 175 mm |
| 24563-162 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 235 mm |
| 24563-163 | 295 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 295 mm |
| 24563-164 | 355 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 355 mm |
| 24563-172 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 3 U, 235 mm |
| 24563-173 | 295 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 3 U, 295 mm |
| 24563-174 | 355 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 3 U, 355 mm |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 175 mm deep. Rails run on a 15 mm grid, so 175 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24563-161 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-161: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-161, nVent 24563-161, SCHROFF 24563-161 — matching C-BOX catalog number 24563-161. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-161 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote