Subracks & 19″ Chassis · 19" Subracks & Cases
Rear horizontal rail for backplane mounting with insulation strip
Catalog#: 24563-164 · 24563164

Codes that start with 24563 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | Depth | Description |
|---|---|---|
| 24563-145 | 415 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 415 mm |
| 24563-146 | 475 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, 3 U, 475 mm |
| 24563-152 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, CompactPCI, 3 U, 235 mm |
| 24563-157 | 275 mm | EuropacPRO 19" Subrack Kit for Backplane, Shielded, CompactPCI, 3 U, 275 mm |
| 24563-161 | 175 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 175 mm |
| 24563-162 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 235 mm |
| 24563-163 | 295 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 295 mm |
| 24563-164 ← this page | 355 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Retrofit Shielding, 3 U, 355 mm |
| 24563-172 | 235 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 3 U, 235 mm |
| 24563-173 | 295 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 3 U, 295 mm |
| 24563-174 | 355 mm | EuropacPRO 19" Subrack Kit for Backplane, Heavy, Shielded, 3 U, 355 mm |
| 24563-191 | 175 mm | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 3 U, 175 mm |
| 24563-192 | 235 mm | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 3 U, 235 mm |
| 24563-193 | 295 mm | EuropacPRO 19" Subrack Kit for DIN Connector, Retrofit Shielding, 3 U, 295 mm |
Showing 14 of 167 codes in the 24563 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 355 mm deep. With the rails on their 15 mm grid this frame takes boards from 160 mm to 340 mm, depending on where the rails sit. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24563-164 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24563-164: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24563-164, nVent 24563-164, SCHROFF 24563-164 — matching C-BOX catalog number 24563-164. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24563-164 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote