Subracks & 19″ Chassis · 19" Subracks & Cases
Non-EMC shielded subrack for backplane mounting, light version.
Catalog#: 24564-132 · 24564132

Codes that start with 24564 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | Depth | Pack qty | Description |
|---|---|---|---|
| 24564-100 | — | 1 | Hood for 19" module support |
| 24564-109 | — | 1 | Front Frame for EMC Shielding for Horizontal Boards Mounting, 3 U, 20 HP |
| 24564-117 | — | 1 | Board Cage for Horizontal Board Installation, 3 U, 20 HP |
| 24564-118 | — | 1 | Board Cage for Horizontal Board Installation, 3 U, 20 HP, Front Rail With Long Lip |
| 24564-131 | 175 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 3 U, 175 mm |
| 24564-132 ← this page | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 3 U, 235 mm |
| 24564-133 | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 3 U, 295 mm |
| 24564-145 | 175 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 3 U, 175 mm |
| 24564-147 | 235 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 3 U, 235 mm |
| 24564-149 | 295 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 3 U, 295 mm |
| 24564-151 | 355 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 3 U, 355 mm |
| 24564-197 | — | — | EuropacPRO 19" Bracket for Textile Gasket, Type F, 3 U |
| 24564-198 | — | — | EuropacPRO 19" Bracket for Textile Gasket, Type F, Handle Holes, 3 U |
| 24564-199 | — | 2 | EuropacPRO Rear Angle for Textile EMC Gasket for Side Panel, 3 U |
Showing 14 of 32 codes in the 24564 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 235 mm deep. With the rails on their 15 mm grid this frame takes boards from 160 mm to 220 mm, depending on where the rails sit. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24564-132 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24564-132: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24564-132, nVent 24564-132, SCHROFF 24564-132 — matching C-BOX catalog number 24564-132. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24564-132 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote