Subracks & 19″ Chassis · 19" Subracks & Cases
Non-EMC shielded subrack for backplane mounting, light version.
Catalog#: 24564-431 · 24564431

Codes that start with 24564 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.
| Catalog no. | U height | Depth | Pack qty | Description |
|---|---|---|---|---|
| 24564-198 | 3U | — | — | EuropacPRO 19" Bracket for Textile Gasket, Type F, Handle Holes, 3 U |
| 24564-199 | 3U | — | 2 | EuropacPRO Rear Angle for Textile EMC Gasket for Side Panel, 3 U |
| 24564-209 | 4U | — | 1 | Front Frame for EMC Shielding for Horizontal Boards Mounting, 4 U, 28 HP |
| 24564-217 | 4U | — | 1 | Board Cage for Horizontal Board Installation, 4 U, 28 HP |
| 24564-297 | 4U | — | 2 | EuropacPRO 19" Bracket for Textile Gasket, Type F, 4 U |
| 24564-298 | 4U | — | 2 | EuropacPRO 19" Bracket for Textile Gasket, Type F, Handle Holes, 4 U |
| 24564-299 | 4U | — | 2 | EuropacPRO Rear Angle for Textile EMC Gasket for Side Panel, 4 U |
| 24564-431 ← this page | 6U | 175 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 175 mm |
| 24564-432 | 6U | 235 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 235 mm |
| 24564-433 | 6U | 295 mm | 1 | EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 295 mm |
| 24564-445 | 6U | 175 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 175 mm |
| 24564-447 | 6U | 235 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 235 mm |
| 24564-449 | 6U | 295 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 295 mm |
| 24564-451 | 6U | 355 mm | 2 | EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 355 mm |
Showing 14 of 32 codes in the 24564 series — see the full series →
Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample
Answers below use this catalog number's own figures from the specification table above.
This frame is 175 mm deep. Rails run on a 15 mm grid, so 175 mm of insertion depth takes a 160 mm board. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.
Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.
No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.
The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.
This C-BOX part is compatible with nVent SCHROFF 24564-431 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24564-431: a drop-in alternative for existing installations, no rework required.
Cross-reference: nVent SCHROFF 24564-431, nVent 24564-431, SCHROFF 24564-431 — matching C-BOX catalog number 24564-431. Same hole pattern, same panel cut-out, same thread.
Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.
Need 24564-431 or a compatible custom version? Send an RFQ — engineering response within one business day.
Request a Quote