Kunshan Plant · Jiangsu  |  Hefei Plant · Anhui, China [email protected]  |  WhatsApp +86 132 6227 6239
C-BOX Electronic Technology Request a Quote
Home  ›  Products  ›  Subracks & 19″ Chassis  ›  24564-433

Subracks & 19″ Chassis · 19" Subracks & Cases

EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 295 mm

Non-EMC shielded subrack for backplane mounting, light version.

Catalog#: 24564-433 · 24564433

Download Catalog (PDF) Download Spec Sheet (PDF) Dimension & Hole Layout (PDF) Request a Sample
Lead time
7 days
standard items, ex-works China
MOQ
1 pc
one unit is fine — mix sizes freely
Samples
On request
we ship a sample against your PO or courier account
C-BOX EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 295 mm, catalog number 24564-433

Features

  • Aluminum construction
  • Anodized; Passivated finish
  • 84HP rack width
  • 6U rack height
  • Subrack/Chassis
  • Complies with IEC 60297-3-100; IEC 60297-3-101; IEEE 1101.1

Specifications

Catalog Number24564-433
Rack Width84HP
Rack Height6U
MaterialAluminum
FinishAnodized; Passivated
Product TypeSubrack/Chassis
Complies WithIEC 60297-3-100; IEC 60297-3-101; IEEE 1101.1
Static Load7.5kg
Package Quantity1
Depth295mm
For MountingBackplane
Board Depth160mm; 220mm; 280mm
Handle IncludedNo
MountingRack
EMC ShieldingNo
Net Weight1.83kg

Item(s) Delivered

Same series · catalog number comparison

Codes that start with 24564 share the same interface and mounting geometry; height, width, depth or pack quantity is what changes. Pick the row that matches your BOM — if you are replacing another brand’s number, tell us the code and we will confirm the match.

Catalog no.U heightDepthPack qtyDescription
24564-2094U—1Front Frame for EMC Shielding for Horizontal Boards Mounting, 4 U, 28 HP
24564-2174U—1Board Cage for Horizontal Board Installation, 4 U, 28 HP
24564-2974U—2EuropacPRO 19" Bracket for Textile Gasket, Type F, 4 U
24564-2984U—2EuropacPRO 19" Bracket for Textile Gasket, Type F, Handle Holes, 4 U
24564-2994U—2EuropacPRO Rear Angle for Textile EMC Gasket for Side Panel, 4 U
24564-4316U175 mm1EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 175 mm
24564-4326U235 mm1EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 235 mm
24564-433 ← this page6U295 mm1EuropacPRO 19" Subrack Kit for Backplane, Light, Unshielded, 6 U, 295 mm
24564-4456U175 mm2EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 175 mm
24564-4476U235 mm2EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 235 mm
24564-4496U295 mm2EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 295 mm
24564-4516U355 mm2EuropacPRO Side Panel for Textile Gasket, Type H, Heavy, 6 U, 355 mm
24564-4976U——EuropacPRO 19" Bracket for Textile Gasket, Type F, 6 U
24564-4986U——EuropacPRO 19" Bracket for Textile Gasket, Type F, Handle Holes, 6 U

Showing 14 of 32 codes in the 24564 series — see the full series →

Lead time 7 days for standard items · MOQ 1 pc · ask for a quote or a sample

Questions specific to 24564-433

Answers below use this catalog number's own figures from the specification table above.

295 mm deep — which board depth does that take?

This frame is 295 mm deep. With the rails on their 15 mm grid this frame takes boards from 160 mm to 280 mm, depending on where the rails sit. If a rear transition module is planned, allow another 80 mm behind the board, because the rear side of the connector still needs clearance.

Does it take a backplane or DIN connectors?

Backplane mount: the board connectors sit on a rear PCB and the horizontal rails carry an insulating strip. The frame is not prepared for DIN 41612 / IEC 60603-2 connectors in the rails, so if your boards use those, take the connector-mount variant of the same series rather than adapting this one.

Is EMC shielding available for this variant?

No. This variant ships unshielded and is not prepared for a gasket, so if a shielding figure is in your specification, move up to the shielded variant of the same series (stainless-steel or textile gasket) instead of trying to retrofit this frame.

7.5 kg static load — what does that cover?

The rating covers the complete assembly: frame, rails, backplane and the plug-in units, with the frame supported at both 19″ brackets. The same series has heavier and lighter variants — the comparison table above lists them — so a heavier payload is a variant change, not a reinforcement. Weigh the loaded assembly rather than the bare enclosure before you compare this figure with another supplier's.

Related 19" Subracks & Cases

Catalog#: 21500-067
EuropacPRO 19" Subrack Kit for Railway, Retrofit Shielding, SNCF, 3 U, 36 HP, 320 mm
Catalog#: 21500-068
EuropacPRO 19" Subrack Kit for Railway, Shielded, SNCF, 3 U, 36 HP, 320 mm
Catalog#: 21500-070
EuropacPRO 19" Subrack Kit for Railway, Retrofit Shielding, SNCF, 6 U, 36 HP, 320 mm
Catalog#: 21500-071
EuropacPRO 19" Subrack Kit for Railway, Shielded, SNCF, 6 U, 36 HP, 320 mm
Catalog#: 24563-107
EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, 3 U, 205 mm
Catalog#: 24563-108
EuropacPRO 19" Subrack Kit for Backplane, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm
Catalog#: 24563-109
EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, 3 U, 205 mm
Catalog#: 24563-110
EuropacPRO 19" Subrack Kit for DIN Connector, Wall Mount, Unshielded, With Rear Hood, 3 U, 205 mm

Compatibility with nVent SCHROFF 24564-433

This C-BOX part is compatible with nVent SCHROFF 24564-433 — same interface dimensions, our own tooling, material and finish. It is also a direct replacement for nVent SCHROFF 24564-433: a drop-in alternative for existing installations, no rework required.

Cross-reference: nVent SCHROFF 24564-433, nVent 24564-433, SCHROFF 24564-433 — matching C-BOX catalog number 24564-433. Same hole pattern, same panel cut-out, same thread.

Cross-referencing a different part number? Send it to us and we will match the equivalent C-BOX part, with drawing and lead time.

Send us your drawing or part number

Need 24564-433 or a compatible custom version? Send an RFQ — engineering response within one business day.

Request a Quote